ARDUINO BOARD INFORMAION

-





SPECIFICATION OF ARDUINO USO BOARD:
  1. MCU: ATMega 328
  2. SIX ANALOG INPUT PINS /ADC                  (A0,A1,A2,A3,A4,A5).
  3. 14 DIGITAL GPIO'S                                         (0 TO 13)
  4. SIX ANALOG OUTPUT PINS/DAC /PWM   (3,5,6,9,10,11).
  5. ONE SPI PORT                                                 (13=SCK,12=MISO,11=MOSI).
  6. ONE UART PORT                                            (0=RxD,1=TxD)
  7. ONE I2C PORT                                                 (A4=SDA,A5=SDL) 
FOR MORE DETAILS OF ARDUINO UNO BOARD CLICK ON IMAGE GIVEN BELOW 


THERE ARE NUMBER OF BOARDS OF ARDUINO 

 1.ARDUINO MEGA
2.ARDUINO UNO
3.ARDUINO MICRO
4.ARDUINO NANO
5.ARDUINO PRO MICRO
6.ARDUINO PRO MINI

 AND MUCH MORES WE WILL SEE LATER ON ONCE YOU GET FAMILIAR WITH ARDUINO





























Comments

Post a Comment

Popular posts from this blog

Analog input Analog output of arduino

-
Image
analogWrite() Arduino uno has 8 bit DAC Actually analog output of Arduino is PWM. On most Arduino boards (those with the ATmega168 or ATmega328P), this function works on pins 3, 5, 6, 9, 10, and 11. On the Arduino Mega, it works on pins 2 - 13 and 44 - 46. Older Arduino boards with an ATmega8 only support analogWrite()   on pins 9, 10, and 11. Syntax analogWrite(pin, value) Example Code Sets the output to the LED proportional to the value read from the potentiometer.(Note:-make correction analog pin=A3 ). int ledPin = 9 ; // LED connected to digital pin 9 int analogPin = 3 ; // potentiometer connected to analog pin 3 int val = 0 ; // variable to store the read value void setup () { pinMode (ledPin, OUTPUT ); // sets the pin as output } void loop () { val = analogRead (analogPin); // read the input pin analogWrite (ledPin, val / 4 ); // analogRead values go from 0 to 1023, analogWrite values from 0 to 255 } ...
Read more

Arduino basic:How to get sub string from a string in arduino

-
Image
ArduinoTutorial 01:String manipulation 1 (Getting substring from a large string) hello, everyone in some cases we need small parts of the string to manipulate. here substring and index function play an important role. I am providing example code in this blog  String IP = "111.222.333.444"; int FIRST_INDEX; int SECOND_INDEX; int THIRD_INDEX; void setup() { Serial.begin(9600); FIRST_INDEX=IP.indexOf("."); SECOND_INDEX=IP.indexOf(".",FIRST_INDEX+1); THIRD_INDEX=IP.indexOf(".",SECOND_INDEX+1 ); Serial.print(IP.substring(0,FIRST_INDEX)); Serial.print(IP.substring(FIRST_INDEX+1,SECOND_INDEX)); Serial.print(IP.substring (SECOND_INDEX+1 ,THIRD_INDEX )); } void loop() {   // put your main code here, to run repeatedly:   } https://youtu.be/fjVXhcqWlEM ......watch more videos related to Aduino Assistance
Read more